About Department

Introduction

            Department of Mechanical Engineering was started in 1984 with an intake of 60 students. In 1993 the all India council for technical education granted approval for the addition of 180 students. Now the mechanical engineering department is having 240 students for I year and a addition 48 seats for direct II year students.

Eligibility
For First Year : 10th Standard Passed /11th or 12th standard Pass / Fail For Second Year (Lateral Entry) : 12th Standard Passed
Programmes offered:

  • DME – Diploma in Mechanical Engineering
  • DME(PT) – Diploma in Mechanical Engineering (Part Time)

Faculty

I. ANBALAGAN HOD
Degree Specialization Institution University Year of Passing
B.Tech MECHANICAL PRIST,TRICHY PRIST 2012
D.KARTHIKEYAN HOD
Degree Specialization Institution University Year of Passing
B.Tech MECHANICAL PRIST,TRICHY PRIST 2013
N.SHIEK THAVUDU LECTURER
Degree Specialization Institution University Year of Passing
M.E MANUFACTURING MIET ENGG.COLLEGE ANNA UNIVERSITY 2016
B.E MECHANICAL M.A.M COLLEGE OF ENGINEERING ANNA UNIVERSITY 2010
P.MARIYA FELIX LECTURER
Degree Specialization Institution University Year of Passing
M.E MANUFACTURING MIET ENGG.COLLEGE ANNA UNIVERSITY 2017
B.E MECHANICAL JJ COLLEGE OF ENGINEERING ANNA UNIVERSITY 2011
M. SOUNDARA RAJAN LECTURER
Degree Specialization Institution University Year of Passing
B.E MECHANICAL GOVT.COLLEGE OF ENGINEERING,SALEM ANNA UNIVERSITY 2013
K.KATHIRVEL LECTURER
Degree Specialization Institution University Year of Passing
B.E MECHANICAL MSAJ COLLEGE  OF ENGINEERING,CHENNAI ANNA UNIVERSITY 2010
C.PRASANTH LECTURER
Degree Specialization Institution University Year of Passing
M.E MANUFACTURING MOOKAMBIGAI COLLEGE OF ENGINEERING, ANNA UNIVERSITY PURSUING
B.E MECHANICAL MOOKAMBIGAI COLLEGE OF ENGINEERING, ANNA UNIVERSITY 2014
L.VENGADESH LECTURER
Degree Specialization Institution University Year of Passing
B.E MECHANICAL SINCET,NAGAI ANNA UNIVERSITY 2015
R.MANIPRADABAN LECTURER
Degree Specialization Institution University Year of Passing
B.E MECHANICAL ANNA UNIVERSITY ANNA UNIVERSITY 2012
S.DAVIDKALAISELVAN LECTURER
Degree Specialization Institution University Year of Passing
M.E MANUFACTURING ANNA UNIVERSITY,TRICHY ANNA UNIVERSITY 2015
B.E MECHANICAL ANNA UNIVERSITY,TRICHY ANNA UNIVERSITY 2012
P.ARUMUGAM LECTURER
Degree Specialization Institution University Year of Passing
B.E MECHANICAL R.V.S COLLEGE OF ENGINEERING,DINDUGAL ANNA UNIVERSITY 2012
N.ARUNACHALAM LECTURER
M.E MANUFACTURING PRCET,VALLAM ANNA UNIVERSITY 2014
B.E MECHANICAL ANNA UNIVERSITY,TRICHY ANNA UNIVERSITY 2012
P.ARUMUGAM LECTURER
Degree Specialization Institution University Year of Passing
B.E MECHANICAL R.V.S COLLEGE OF ENGINEERING,DINDUGAL ANNA UNIVERSITY 2012
S.ROOBAN RAJ LECTURER
Degree Specialization Institution University Year of Passing
B.E MECHANICAL BANNARI AMMAN INST.OF TECHNOLOGY,SATHYAMANGALAM ANNA UNIVERSITY 2016

Laboratories

COMPUTER APPLICATIONS AND CAD PRACTICAL SOFTWARES

  • OFFICE PACKAGE
  • CAD PACKAGE

FOUNDRY AND WELDING PRACTICAL WELDING

  • ARC WELDING BOOTH
  • GAS WELDING UNIT
  • FLUX
  • ELECTRODE
  • WELDING ROD
  • WELDING SHIELD
  • GAS WELDING GOGGLES
  • LEATHER GLOVES 18’’
  • CHIPPING HAMMER
  • SPOT WELDING MACHINE
  • PERSONAL PROTECTIVE EQUIPMENT
  • FIRE SAFETY EQUIPMENT

FOUNDRY

  • MOULDING BOARD
  • COPE BOX
  • DRAG BOX
  • CORE BOX
  • SHOVEL
  • RAMMER SET
  • SLICK
  • STRIKE OF BAR
  • RIDDLE
  • TROWEL
  • LIFTER
  • CLEANING BRUSH
  • VENT ROD DRAW SPIKE GATE CUTTER
  • RUNNER& RISER
  • PATTERNS
  • FOUNDRY AND WELDING PRACTICAL

LATHE AND DRLLING PRACTICAL

  • LATHE
  • ALL GEARED LATHE
  • 4 JAW / 3 JAW CHUCKS
  • CHUCK KEY
  • SPNNER
  • CUTTING TOOLS
  • PITCH GAUGE
  • THREAD GAUGE
  • VERNIER CALIPER
  • SNAP GAUGE
  • STEEL RULE (0-150)
  • CALIPERS (INSIDE / OUTSIDE / JENNY)
  • DIAL GAUGE WITH MAGNETIC STAND
  • MARKING GAUGE
  • SAFETY GLASS

DRILLING SECTION

  • UPRIGHT DRILLING MACHINE
  • RADIAL DRILLING MACHINE
  • DRILL BIT&TAP SET
  • REAMING BIT
  • COUNTER SINKING BIT
  • COUNTER BORING BIT
  • PLUG GAUGES
  • VERNIER HEIGHT GAUGE
  • SURFACE PLATE

METROLOGY AND METALLOGRAPHY PRACTICAL

  • VERNIER CALIPER
  • DIGITAL VERNIER CALIPER
  • DIAL VERNIER CALIPER
  • MICROMETER
  • DIGITAL MICROMETER
  • SLIP GAUGES
  • UNIVERSAL BEVEL PROTRACTOR
  • SINE BAR
  • THREAD MICROMETER
  • SURFACE PLATE
  • VERNIER HEIGHT GAUGE
  • METALLURGICAL MICROSCOPE
  • DIE PENETRATION
  • MAGNETIC PARTICAL TEST
  • ABRASIVE BELT GRINDER
  • POLISHING MACHINE
  • MOUNTING MACHINE
  • SPECIMEN (FERROUS/ NON FERROUS)
  • CONSUMABLE

MACHINE TOOL TESTING AND MAINTENANCE PRACTICAL MACHINE

  • LATHE MACHINE
  • SHAPING MACHINE
  • DRILLING MACHINE
  • SURFACE GRINDING MACHINE
  • MILLING MACHINE
  • SLOTTING MACHINE

TOOLS:

  • DIAL GAUGE
  • MAGNETIC STAND
  • SURFACE GAUGES
  • SPIRIT LEVEL
  • SPANNERS(DE/RING/BOX)
  • SCREW DRIVERS
  • ALLEN SCREW SETS
  • HAMMER
  • TEST MANDRELS
  • SQUARES / BLOCKS

STRENGTH OF MATERIAS AND FLUID MECHANICS PRACTICAL

  • UNIVERSAL TESTING MACHINE
  • ROCKWELL HJARDNESS TEST
  • TORSION TESTING MACHINE
  • IMPACT TESTING MACHINE
  • SPRING TESTINGH MACHINE
  • SHEAR TESTING MACHINE
  • VERNIER CALIPER
  • BERNOULLI’S APPARTUS
  • MOUTH PIECE AND ORIFICE METER WITH PIEZOMETER
  • CENTRIFUGAL PUMP WITH VENTURIMETER / ORIFICEMETER
  • FRICTION FACTOR OF PIPE
  • RECIPROCATING PUMP
  • IMPULSE TURBINE / REACTION TURBINE

SPECIAL MACHINES PRACTICAL

  • VERTICAL MILLING MACHINE / VERTICAL ATTACHMENT
  • UNIVERSAL MILLING MACHINE
  • SURFACE GRINDING MACHINE
  • CYLINDRICAL GRINDING MACHINE
  • TOOL AND CUTTER GRINDER
  • SHAPING MACHINE
  • SLOTTING MACHINE
  • TOOLS AND MEASURING INSTRUMENTS
  • CONSUMABLES

ELECTRICAL DRIVES AND CONTROL PRACTICAL

  • DC AMMETER 0-5A
  • DC AMMETER 0-25A
  • DC VOLTMETER 0-30V
  • DC VOLTMETER 0-300V
  • RHEOSTAT 10.8 ,8.5A
  • AC AMMETER 0-5A
  • AC AMMETER 0-10A
  • AC VOLTMETER 0-50V
  • AC WATTMETER 5A-10A (0-750W,0-600V)
  • LOADING RHEOSTAT 5A,230V
  • TACHOMETER 0-1000RPM (ANALOG TYPE)
  • VARIAC 20A,250V M(AUTO TRANSFORMER )
  • 3 POINT STARTER 20A,220V
  • DOL STARTER 16A,415V
  • STAR /DELTA STARTER 20A,600V
  • OVER LOAD RELAY 1 TO 2.5A
  • AIR BREAK CONTACTORS 20A,220V
  • PUSH BUTTON 2A ,220V
  • LIMIT SWITCH 20A,220V
  • MCB 20A SINGLE POLE
  • MCB 20A DOUBLE POLE
  • ELCB 2POLE 20A,100MA
  • ELCB 4POLE 20A,100MA
  • TRANSFORMER 230 / 9-0-9V, 1A
  • RESISTOR 1 KILO OHM / ½ W
  • CAPACITOR 1000 F/25V
  • IC 7805.
  • LOGIC GATES IC 7400, 7408, 7432, 7404, 7402, 7486
  • STEPPER MOTOR DRIVE KIT
  • SERVO MOTOR DRIVE KIT
  • DIGITAL MULTIMETER .
  • LED, 7SEGMENT LED, LASER DIODE

PROCESS AUTOMATION PRACTICAL

  • PNEUMATIC TRAINER KIT(ALL CYLINDERS, CONTROL VALVES,LIMIT SWITCHES AND OTHER ACCESSORIES)
  • HYDRAULIC TRAINER KIT (ALL CYLINDERS, CONTROL VALVES,LIMIT SWITCHES AND OTHER ACCESSORIES)
  • PLC KIT
  • COMPUTER WITH SOFTWARE

THERMAL AND AUTOMOBILE ENGINEERING PRACTICAL

  1. OPEN CUP APPARATUS TO DETERMINE FLASH AND FIRE POINTS
  2. CLOSE CUP APPARATUS TO DETERMINE FLASH AND FIRE POINTS
  3. REDWOOD VISCOMETER
  4. SAYBOLT VISCOMETER
  5. 4 STROKE CYCLE PETROL / DIESEL ENGINE MODEL
  6. 2 STROKE CYCLE PETROL / DIESEL ENGINE MODEL
  7. LOAD TEST ON PETROL AND DIESEL ENGINE
  8. HEAT BALACE TEST ON PETROL AND DIESEL ENGINE
  9. MULTI CYLINDER PETROL ENGINE

AUTOMOBILE PRACTICAL:

  1. AUTOMOBILE MECHANIC’S TOOLS COMPLETE SET
  2. 4 STROKE PETROL ENGINE
  3. 4 STROKE DIESEL ENGINE
  4. INTERNAL CIRCLIP PLIER,BEARING PULLER
  5. FEELER GAUGE TO CHECK VALVE CLEARANCE, HAMMER AND ACCESSORIES
  6. SOLEX CARBURETOR
  7. MPFI
  8. INLINE FUEL INJECTION PUMP
  9. CRDI
  10. INJECTORS
  11. CLUTCH SET ARRANGEMENT WITH TOOLS
  12. COMPLETE GEAR BOX WITH TOOLS
  13. COMPLETE STEERING ARRANGEMENT
  14. DIFFERENTIAL UNIT WITH AXELES
  15. BATTERY
  16. BATTERY CHARGER
  17. BATTERY TESTING UNIT (SPECIFIC GRAVITY)
  18. STARTER MOTOR
  19. ALTERNATOR
  20. DYNAMO

COMPUTER AIDED DESIGN AND MANUFACTURING

  • CNC PROGRAMMING SOFTWARES LATHE AND MILLING)
  • MODELLING PACKAGES (SOLIDWORKS / Pro-E / UNIGRAPHICS / AUTOCAD etc…)
  • CNC TURNING MACHINE
  • CNC MILLING MACHINE
  • LASER PRINTER

MACHINE COMPONENTS

  • LEAD SCREW AND NUT
  • TAIL STOCK
  • BENCH VICE
  • THREE JAW CHUCK
  • FOUR JAW CHUCK
  • DRILL CHUCK

Student Achievement

S.NoStudent NameBatch DetailsCompetitionName of the CollegeDateEventWinner / Participant
1.S.VEERAPANDI2014-2017-State player-CAAROMWINNER
2.A.THALAL RASITH2014-2017-Trichy division-VOLLEYBALLRUNNER
3.N.SEENI MOHAMED2014-2017-Trichy division-VOLLEYBALLRUNNER
4.J.DAVID KUMAR2014-2017-Trichy division-FOOTBALLPARTICIPANTS
5.A.DEENA DYALAN2014-2017-Trichy division-FOOTBALLPARTICIPANTS
6.N.SEENI MOHAMED2014-2017-Trichy division-FOOTBALLPARTICIPANTS
7.A.AKILAN2014-2017-Trichy division-KHO-KHO3RD PLACE
8.P.VIGNESH2014-2017-Trichy division-KHO-KHO3RD PLACE
9.G.KATHIRAVAN2014-2017-Trichy division-KHO-KHO3RD PLACE
10.P.VIGNESH2014-2017-Trichy division-HAND BALL2ND PLACE
11.G.KATHIRAVAN2014-2017-Trichy division-HAND BALL2ND PLACE
12.M.MANOJKUMAR2014-2017-Trichy division-HAND BALL2ND PLACE
13.A.AKILAN2014-2017-Trichy division-HAND BALL2ND PLACE
14.V.ROBIN WILLIAMS2014-2017-Trichy division-HAND BALL2ND PLACE
15.A.MOHAMED RIYAS2014-2017-Trichy division-CRICKETPARTICIPANTS
16.N.JAMEEL MOHAMED2014-2017-Trichy division-CRICKETPARTICIPANTS
17.J.DIVAGAR2014-2017-Trichy division-CRICKETPARTICIPANTS
18.S.SHYAM PRASAD2014-2017-Trichy division-CRICKETPARTICIPANTS
19.V.KARTHIKEYAN2014-2017-Trichy division-CRICKETPARTICIPANTS
20.J.PARANJOTHIPANDIAN2014-2017-Trichy division-CRICKETPARTICIPANTS
21.S.MOHAMED SHARFRAS2014-2017-Trichy division-TABEL TENNISWINNER / STATE PATICIPANTS
22.S.THARIK NABEL2014-2017-Trichy division-TABEL TENNISWINNER / STATE PATICIPANTS
23.N.SEENI MOHAMED2014-2017-Trichy division-TABEL TENNISWINNER / STATE PATICIPANTS
24.V.ROBIN WILLIAMS2014-2017-Trichy division-HOCKEY3RD PLACE
25.G.KATHIRAVAN2014-2017-Trichy division-HOCKEY3RD PLACE
26.P.VIGNESH2014-2017-Trichy division-HOCKEY3RD PLACE
27.N.ARUN PRABAKAR2014-2017-Trichy division-CHESS4TH PLACE
28.BARANI KUMAR2014-2017-Trichy division-CHESS4TH PLACE
29A.THALAL RASITH2014-2017-Trichy division-BAD MINTONRUNNER
30.S.THARIK NABEL2014-2017-Trichy division-BAD MINTONRUNNER
31.N.ARUN PRABHAKAR2014-2017-Trichy division-ATHELETICSPARTICIPANTS

Contact us

I. ANBALAGAN
Head of the Department,
Department of Mechanical Engineering
M.I.E.T Polytechnic College,
Trichy-07.