M.I.E.T POLYTECHNIC COLLEGE
Trichy, Tamilnadu - 620 007

Introduction

           The Electrical and Electronics Engineering department of MIET Polytechnic College has its humble beginning in June 1984 with an intake of 60 students as First batch. The department has well qualified and dedicated faculty members with on hand field and academic experience. The department has grown during the year to cater the need of modern industry and requirement of syllabus / scheme prescribed by the Director of Technical Education Tamil Nadu. Here in depth theoretical and practical knowledge is imparted to the students. Specialization in control of Electrical Machines and Power Electronics are done as a part of Elective Theory subjects.

           The department provides excellent opportunity to students in project work, in house preparation of technical papers for seminar / symposium etc.

           The mission of this department is to prepare and train students for future industry with excellent skill, knowledge, attitude to give greater performance and help in building the nation in the electrical and electronics engineering field.

Eligibility
For First Year : 10th Standard Passed /11th or 12th standard Pass / Fail
For Second Year (Lateral Entry) : 12th Standard Passed
Programmes offered:

  • DEEE – Diploma in ELECTRICAL AND ELECTRONICS ENGINEERING
M.SHERIFF HOD
Degree Specialization Institution University Year of Passing
M.E POWER ELECTRONICS &DRIVES M.I.E.T ENGINEERING COLLEGE ANNA UNIVERSITY APRIL-2015
B.E ELECTRICAL AND ELECTRONICS ENGINEERING M.I.E.T ENGINEERING COLLEGE BHARATHIDASAN

UNIVERSITY

 

APRIL-2002

Area of Interest
CONTROL OF ELECTRICAL EQUIPMENT’S
P.SHEIK MOHAMED LECTURER
Degree Specialization Institution University Year of Passing
M.E. .
B.E. . EEE JJCET,TRICHY ANNA UNIVERSITY,CHENNAI 2008
Area of Interest
CONTROL OF ELECTRICAL EQUIPMENTS
S.MANIVANNAN LECTURER
Degree Specialization Institution University Year of Passing
M.E. . POWER SYSTEMS ANNA UNIVERSITY COLLEGE OF ENGINEERING,B.I.T CAMPUS,TRICHY ANNA UNIVERSITY,CHENNAI 2013
B.E. . E.E.E ALAGAPPA CHETTIAR COLLEGE OF ENGINEERING AND TECHNOLOGY,KARAIKUDI MADURAI KAMARAJ UNIVERSITY 1995
Area of Interest
1.Power systems ,2.Electrical machines
D.RAJKUMAR LECTURER
Degree Specialization Institution University Year of Passing
M.E Power system Anna university Anna university 2015
B.E EEE Park college of engineering &technology Anna university 2009
Area of Interest
Electrical circuit theory
S.KESAVARAJ LECTURER
Degree Specialization Institution University Year of Passing
M.E Power system Anna university Anna university 2014
B.E EEE MIET Anna university 2006

                   Area of Interest

POWER SYSTEM
M.SYED MEERAN LECTURER
Degree Specialization Institution University Year of Passing
M.E Power electronics &drives JJ college of engineering Anna university 2013
B.E Electronics&communication engg Sapthagiri college of engineering Anna university 2011
                   Area of Interest
POWER SYSTEM
P.ANDIYAPPAN LECTURER
Degree Specialization Institution University Year of Passing
B.E. . EEE ACT ANNA UNIVERSITY 2012

                   Area of Interest

POWER SYSTEM
R.PARTHIBAN LECTURER
Degree Specialization Institution University Year of Passing
M.E. . Power system Anna university Anna university 2012
B.E. . EEE JJCET Anna university 2009
                   Area of Interest
POWER SYSTEM

ELECTRICAL MACHINES LAB

All electrical motors with or without load (AC & DC Supply) are controlled and its characteristics are analyzed by pictorial representation.

WIRING & WINDING LAB

To provide hands on experience in electrical wiring and winding
for all domestic and commercial purpose.

ELECTRICAL WORK SHOP

Identify and use the tools used in servicing of electrical appliances and assembling and de assembling the various parts of domestic appliances

CAED LAB

All electrical motors and electronics control circuits (2D & 3D) are drawn by using AutoCAD software.

SIMULATION LAB

All electrical motors and electronics control circuits are simulated and outputs are seen in the system itself without any electrical equipment’s by using simulation software.

ELECTRONICS LAB

Describing the various methods of converters and inverters and rectifiers and also analyzing the power semiconductor devices. To know about the interfacing by using micro controller kits.

Electronics Devices and Circuits

  • Dual power supply 0-15V 10
  • High Voltage Power Supply 0-250V 2
  • Signal Generator 1MHz 10
  • Dual trace CRO 20 MHz & 60 MHz 5 + 5
  • Transformer 12-0-12V 5
  • Digital Multi meter – 10
  • Synchronous Motor 1 HP 1
  • 3 Phase Squirrel cage Induction motor 5 HP 440V/20A 1
  • 1 phase Induction motor 1 HP 230V/0.5A 1
  • 3 phase Slip ring Induction motor 5HP 440V/20A 1
  • AC Ammeter (0-2)A 2
  • AC Ammeter (0-15)A 2
  • AC Ammeter (0-10)A 2
  • AC Ammeter (0-5)A 5
  • DC Ammeter(0-2)A 3
  • AC Voltmeter (0-300)V 3
  • AC Voltmeter(0-600)V 6
  • Wattmeter (0-24)V,5A,10A 3
  • Wattmeter (0-60)V,5A,10A 7
  • Wattmeter (0-750)W wattmeter multi range 1500W-10A,3000W-
  • Wheatstone bridge 2
  • Anderson Bridge 2
  • Schering Bridge 2
  • 1 Phase Energy meter Calibration Induction Type 1
  • 3 Phase Energy meter Calibration Induction Type 1
  • Earth Resistance Kit 2
  • LVDT Kit to measure Displacement 2
  • Load Cell calibration various Load arrangement 2
  • Alternator 1 phase 1
  • Alternator 3 phase 1
  • Tachometer Analog type 2
  • Tachometer Digital 1
  • Synchroscope 1
  • Frequency meter 2
  • PF meter (paver factor meter) 2
  • Single phase R.S.S meter 1
  • phase R.S.S meter

Electrical machines and circuits

  • Superposition theorem Trainer
  • Thevenin’s theorem Trainer
  • Maximum power transfer theorem trainer
  • RLC Series Resonance Trainer
  • DC Shunt Motor 1 Hp with loading arrangement
  • DC Series Motor with loading arrangement
  • DC Compound Motor with loading arrangement
  • DC Shunt Generator with Terminal out let
  • DC Series Generator with Terminal outlet
  • 1 phase Transformer 1KVA, 3KVA 220V/110V 3
  • 3 phase Transformer 3KVA, 440V/220V
  • 1 phase Variac Drum type
  • 3 phase Variac Drum type
  • Loading Rheostat 230V,10A, 3 phase loading Rheostat
  • Loading Rheostat 230V,24A
  • Tachometer Analog type
  • Tachometer Digital
  • 3 point starter
  • Rheostat – various ranges 50Ω-100Ω,1300Ω-600Ω 10
  • DC Ammeter- various ranger 0-1,0-2,0-15,0-30 10
  • DC Voltmeter- various ranges 0-75V,0-150V, 0-300V,0-600V 10
  • AC ammeter-various ranges
  • AC Voltmeter- various ranges
  • Wattmeter-various ranges
  • 4 point Starter

Electrical Circuits Simulation

  • PC – Pentium Dual Core 30
  • MATLAB 7.5 – Multi user 1
  • UPS 5KVA with half an Hour battery back up 1

Microcontroller

  • 8051 Microcontroller Kit 18
  • Digital I/O Interface Board 1
  • Matrix keyboard Interface Board 1
  • Seven segment LED display Interface Board 1
  • LCD Display Interface Board 1
  • Traffic light Interface Board 1
  • 8 bit ADC and 8 bit DAC Interface Board 1
  • STEPPER MOTOR CONTROL Interface Board 1
  • DC motor control Interface Board 1
  • Lift control Interface Board 1
  • Sending data through serial port between controller kits 1
  • Printer Interface Interface Board. 1

Wiring and Winding

  • SPST Flush type switch 250 V, 5A
  • Batten Lamp holder
  • Round block
  • Switch board 20 cm x 15 cm 1 No.10 cm x 10 cm
  • M.C.B. 250 V, 10 A, 2 pole
  • Push button switch 250 V, 5A
  • 2 plate ceiling rose 250 V, 5A
  • Electric bell 250 V, 5A
  • Single phase D.P.I.C. Main switch 250 V, 16A
  • Single phase D.O.L. Starter 250 V, 10 A
  • Three phase T.P.I.C. Main switch 500 V, 30 A
  • Star / delta starter 440 V, 5 H.P.
  • E.L.C.B. 500 V, 30 A
  • Single phase, 2 wire watt-hour meter 250 V, 15A, 50 hz
  • Cut out 16 A
  • Single phase, 4 way distribution Box 250 V, 15 A
  • Mercury vapour lamp with accessories
  • Sodium vapour lamp with accessories
  • Fluorescent tube light with electronic choke and holder 40 W
  • Neon tube lamp (any sign) 3 blocks
  • Two way flush type switch 250 V, 5A
  • Wooden box 30 cm x 15 cm
  • PVC pipe 1”
  • Saddle clips 1”
  • Coppor wire 2.5 sq.mm.
  • 1.5 sq.mm
  • 1” junction box
  • One way
  • Two way
  • Three way
  • Screws

Control of Electrical Machines

  • Transformer oil Tester Kit 1
  • Acidity test kit 1
  • Thermal Overload Relay Tester 1
  • Control circuit for Jogging of 3 phase IM 1
  • Control Circuit for Semi-automatic Star –delta Starter 1
  • Control circuit for Automatic star-delta starter 1
  • Control circuit for dynamic braking of cage motor 1
  • control circuit for two speed pole changing motor 1
  • control circuit for automatic Rotor resistance starter 1
  • Speed control of DC motor using SCR 1
  • control circuit for single phase preventer 1
  • control circuit for DOL starter using PLC 1
  • control circuit for Star-Delta starter using PLC 1
  • Control circuit for jogging, forward and reverse operations using PLC
  • Control circuit for single phase preventer using PLC 1
  • Control circuit rotor resistance starter using PLC 1
  • PLC

Power Electronics Practical

  • Cathode Ray Oscilloscope 30 Mhz
  • Power Supply Unit (0-30)V, 2 A
  • UJT Trigger Circuit Kit – Ramp & Ramp and Pedestal mode
  • Half Controlled Bridge Kit with Resistive and Inductive load
  • Fully Controlled Bridge Kit with Resistive and Inductive load
  • Universal Motor
  • I phase Capacitor start Induction Motor
  • SCR Commutation Trainer
  • Basic Series Inverter Trainer
  • MOSFET based Parallel Inverter Trainer ( Single phase)
  • IGBT based Parallel Inverter Trainer ( Single phase)
  • DC Chopper Trainer with Resistive and Inductive load
  • DC Shunt motor ½ HP
  • Single phase to Single phase cycloconverter Trainer
  • Closed loop control of DC Motor with loading arrangement
  • Closed loop control of AC Motor with loading arrangement
  • PWM based Stepdown DC Chopper using MOSFET
  • PWM based Stepdown DC Chopper using IGBT
  • MOSFET based SMPS Trainer
  • GBT based SMPS Trainer
  • Single phase Sinusoidal PWM inverter using MOSFET
  • Single phase Sinusoidal PWM inverter using IGBT
  • Three phase Half bridge Converter
  • Three phase Full bridge Converter
  • Tachometer Analog type

Programmable Logic Controller

  • PLC with suitable No of I/O (various brands, Computer interface cables software etc)
  • Push button switch limit switch, reed switch, photo electric sensor, inductive proximity
  • sensor Capacitive proximity sensor
  • PLC Power supply (SMPS if necessary)
  • DOL Starter
  • 440V, 16A Contactor 3P,2NO+2NC
  • 440V, 16A Contactor 4P,2NO+2NC
  • 230V, 16A Contactor 3P,2NO+2NC
  • Industrial sliding door automation model
  • Conveyor Belt sorting model
  • Three floor Hoist controller model
  • Analog input to PLC (Addon blocks if needed)
  • LAMP LOAD for Burglar scare random lighting in building with variable timing
  • Heater control with PID function of the PLC- 1000 W water heater with accessaries
  • Round Table – Liquid filling System (simple model)
  • Electric bell (230V Operation)
  • Slow speed 12V DC, Low Watt Permanent Magnet Motor

Electrical Machine Design

  • Permanent Magnets
  • Galvanometers
  • Flux meter
  • Growler
  • 3Phase induction motor stator with winding
  • 1KVA Single phase 230/15 loading Transformer
  • 1KVA 3 phase Transformers
  • E & I type stampings for 1KVA Transformer
  • Primary Coils & Secondary Coils for 1KVA Transformer
  • 5KW DC armature without winding
  • 5KW DC machine with inter poles
  • Stator with winding, rotor and end covers with bearing of a 3HP cage induction motor –
  • 5KVA Single phase alternator
  • 3phase 3HP wound rotor induction motor
  • Celling Fans
  • Motor coil winding machines
S.NoStudent NameBatch DetailsCompetitionName of the CollegeDateEventWinner / Participant
1Saiyed rehan Sunil kumar2014-2017 SymposiumKongu nadu polytechnic college thottium24-7-2016Paper presentationParticipant

Mr.M.Sheriff
Head of the Department,
Department of Electrical and Electronics Engineering,
M.I.E.T Polytechnic College,
Trichy-07.